156-915.77 | Top Tips Of Leading 156-915.77 Free Dumps

Precise of 156-915.77 exam fees materials and study guides for CheckPoint certification for candidates, Real Success Guaranteed with Updated 156-915.77 pdf dumps vce Materials. 100% PASS Check Point Certified Security Expert Update Blade exam Today!

Free 156-915.77 Demo Online For CheckPoint Certifitcation:

NEW QUESTION 1

Several Security Policies can be used for different installation targets. The Firewall protecting Human Resources’ servers should have its own Policy Package. These rules must be installed on this machine and not on the Internet Firewall. How can this be accomplished?

  • A. A Rule Base is always installed on all possible target
  • B. The rules to be installed on a Firewall are defined by the selection in the Rule Base row Install On.
  • C. When selecting the correct Firewall in each line of the Rule Base row Install On, only this Firewall is shown in the list of possible installation targets after selecting Policy > Install on Target.
  • D. In the menu of SmartDashboard, go to Policy > Policy Installation Targets and select the correct firewall via Specific Targets.
  • E. A Rule Base can always be installed on any Check Point Firewall objec
  • F. It is necessary to select the appropriate target directly after selecting Policy > Install on Target.

Answer: C

NEW QUESTION 2

After implementing Static Address Translation to allow Internet traffic to an internal Web Server on your DMZ, you notice that any NATed connections to that machine are being dropped by anti-spoofing protections. Which of the following is the MOST LIKELY cause?

  • A. The Global Properties setting Translate destination on client side is unchecke
  • B. But the topology on the DMZ interface is set to Internal - Network defined by IP and Mas
  • C. Check the Global Properties setting Translate destination on client side.
  • D. The Global Properties setting Translate destination on client side is unchecke
  • E. But the topology on the external interface is set to Others +. Change topology to External.
  • F. The Global Properties setting Translate destination on client side is checke
  • G. But the topology on the external interface is set to Externa
  • H. Change topology to Others +.
  • I. The Global Properties setting Translate destination on client side is checke
  • J. But the topology on the DMZ interface is set to Internal - Network defined by IP and Mas
  • K. Uncheck the Global Properties setting Translate destination on client side.

Answer: A

NEW QUESTION 3

You find that Gateway fw2 can NOT be added to the cluster object. What are possible reasons for that?
Exhibit:
156-915.77 dumps exhibit
1) fw2 is a member in a VPN community.
2) ClusterXL software blade is not enabled on fw2.
3) fw2 is a DAIP Gateway.

  • A. 2 or 3
  • B. 1 or 2
  • C. 1 or 3
  • D. All

Answer: C

NEW QUESTION 4

Which is the lowest Gateway version manageable by SmartCenter R77?

  • A. R65
  • B. S71
  • C. R55
  • D. R60A

Answer: A

NEW QUESTION 5
CORRECT TEXT
Fill in the blank.
156-915.77 dumps exhibit
In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. An internal host 10.4.8.108 successfully pings its Cluster and receives replies. Review the ARP table from the internal Windows host 10.4.8.108. Based on this information, what is the active cluster member’s IP address?


Solution:


Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 6
CORRECT TEXT
Type the command and syntax you would use to verify that your Check Point cluster is functioning correctly.


Solution:
cphaprob state

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 7

You are responsible for the configuration of MegaCorp’s Check Point Firewall. You need to allow two NAT rules to match a connection. Is it possible? Give the BEST answer.

  • A. No, it is not possible to have more than one NAT rule matching a connectio
  • B. When the firewall receives a packet belonging to a connection, it compares it against the first rule in the Rule Base, then the second rule, and so o
  • C. When it finds a rule that matches, it stops checking and applies that rule.
  • D. Yes, it is possible to have two NAT rules which match a connection, but only in using Manual NAT (bidirectional NAT).
  • E. Yes, there are always as many active NAT rules as there are connections.
  • F. Yes, it is possible to have two NAT rules which match a connection, but only when using Automatic NAT (bidirectional NAT).

Answer: D

NEW QUESTION 8

In SmartDashboard, Translate destination on client side is checked in Global Properties. When Network Address Translation is used:

  • A. It is not necessary to add a static route to the Gateway’s routing table.
  • B. It is necessary to add a static route to the Gateway’s routing table.
  • C. The Security Gateway’s ARP file must be modified.
  • D. VLAN tagging cannot be defined for any hosts protected by the Gateway.

Answer: A

NEW QUESTION 9
Update the topology in the cluster object for the cluster and both members.


Solution:


Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 10

Which operating systems are supported by a Check Point Security Gateway on an open server? Select MOST complete list.

  • A. Sun Solaris, Red Hat Enterprise Linux, Check Point SecurePlatform, IPSO, Microsoft Windows
  • B. Check Point GAiA and SecurePlatform, and Microsoft Windows
  • C. Check Point GAiA, Microsoft Windows, Red Hat Enterprise Linux, Sun Solaris, IPSO
  • D. Check Point GAiA and SecurePlatform, IPSO, Sun Solaris, Microsoft Windows

Answer: B

NEW QUESTION 11

Which of the following CLISH commands would you use to set the admin user's shell to bash?

  • A. set user admin shell bash
  • B. set user admin shell /bin/bash
  • C. set user admin shell = /bin/bash
  • D. set user admin /bin/bash

Answer: B

NEW QUESTION 12

Which Security Gateway R77 configuration setting forces the Client Authentication authorization time-out to refresh, each time a new user is authenticated? The:

  • A. Time properties, adjusted on the user objects for each user, in the Client Authentication rule Source.
  • B. IPS > Application Intelligence > Client Authentication > Refresh User Timeout option enabled.
  • C. Refreshable Timeout setting, in Client Authentication Action Properties > Limits.
  • D. Global Properties > Authentication parameters, adjusted to allow for Regular Client Refreshment.

Answer: C

NEW QUESTION 13
CORRECT TEXT
Type the command and syntax to configure the Cluster Control Protocol (CCP) to use Broadcast.


Solution:
cphaconf set_ccp broadcast

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 14
CORRECT TEXT
Fill in the blank. What is the correct command and syntax used to view a connection table summary on a Check Point Firewall?


Solution:
fw tab -t connections -s

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 15

You run cphaprob -a if. When you review the output, you find the word DOWN. What does DOWN mean?

  • A. The cluster link is down.
  • B. The physical interface is administratively set to DOWN.
  • C. The physical interface is down.
  • D. CCP pakets couldn't be sent to or didn't arrive from neighbor member.

Answer: D

NEW QUESTION 16
Define virtual IP in the Dashboard


Solution:


Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 17
......

Thanks for reading the newest 156-915.77 exam dumps! We recommend you to try the PREMIUM Downloadfreepdf.net 156-915.77 dumps in VCE and PDF here: https://www.downloadfreepdf.net/156-915.77-pdf-download.html (203 Q&As Dumps)